The only scope that can beat a PICO is another PICO.

And here it is!  The new PICO 4000 series PC-based oscilloscopes are more powerful than ever before. 

Faster Sampling!

The 4000 series can capture signals 4 times faster than any other PICO scope.  This is fast enough to be compatible with the new FlexRay standard, and will keep your scope current with future technologies far longer.

More Memory!

The new PICO 4000 series has more memory than previous scopes...64 times more!  With 32 megabytes of "always on"  memory, and the high sample speeds, catching those elusive "glitches" will be easier than ever.

Higher Input Range

The PICO 4000 series can handle input voltages of +/- 100 volts....meaning the use of attentuators for many automotive voltage levels will no longer be necessary.   Here are the specs:

PicoScope 4000 Series Specifications

(4423 is the 4 channel version, 4223 is the 2 channel)

Oscilloscope Specifications
Bandwidth	20 MHz (10 MHz on ±50 mV range)
Vertical resolution	12 bits
Enhanced vertical resolution	16 bits
Accuracy	±1%
Sensitivity	10 mV/div to 20 V/div
Input ranges (full scale)	±50 mV to ±100 V in 11 ranges
Input characteristics	1 MÙ in parallel with 22 pF
Input type	Single-ended, BNC connector
Input coupling	Software selectable AC/DC
Overload protection	±200 V on single input
Maximum sampling rate (single shot) 1 or 2 channels in use 3 or 4 channels in use	80 MS/s 20 MS/s
Buffer memory	32 M samples shared between active channels
Waveform buffer	Up to 1000 waveforms
Timebase ranges	100 ns/div to 200 s/div

Triggers
Source	Any input channel
Basic triggers	Auto, repeat, single, none
Advanced triggers	Rising edge, falling edge, edge with hysteresis, pulse width, runt pulse, dropout, windowed
Maximum pre trigger delay	10 x ?per division? timebase setting
Maximum post trigger delay	50 s

Spectrum Analyser
Bandwidth	20 MHz
Frequency range	DC to 20 MHz
Display modes	Magnitude, peak hold, average

PC Requirements
Minimum	Processor: Pentium II processor, or equivalent Memory: 64 MB (XP) / 512 MB (Vista) minimum Operating system: Microsoft Windows XP SP2 or Vista (32-bit only) Ports: USB 1.1 compliant port
Recommended	Processor: 2 GHz Pentium IV processor, or equivalent Memory: 256 MB (XP) / 1 GB (Vista) Operating system: Microsoft Windows XP SP2 or Vista (32-bit only) Ports: USB 2.0 compliant port

Environmental
Operating environment Temperature range	0 °C to 45 °C (15 °C to 40 °C for quoted accuracy)
Storage environment Temperature range Humidity	-20 to +60°C 5 to 95% RH, non-condensing

Physical Dimensions
Dimensions	200 x 140 x 35 mm (approx 7.9 x 5.5 x 1.4 in)
Weight	<500 g (approx 1.1 lb)

General
Additional hardware (supplied)	USB 2.0 cable, user manuals, software CD-ROM
PC interface	USB 2.0 (USB 1.1 compatible) - cable supplied
Power requirements	Powered from USB port
Compliance	FCC (EMC), CE (EMC and LVD), RoHS compliant
Total Satisfaction Guarantee	In the event that this product does not fully meet your requirements you can return it for an exchange or refund. To claim, the product must be returned in good condition within 14 days.
Warranty	2 years

It Doesn't Get Any Better!

Match the power of the new 4000 series of scopes with the easy to use software, and the PICO doesn't get any more user friendly.  But there is always a learning curve...where you want help in understanding the pattern you're seeing on the screen. 

And that is THE reason you should buy your PICO from an Autonerdz affiliate...support after the sale!

Not just technical support, or customer service support...but REAL support in getting the most out of your PICO.  A Lifetime commitment to you, including membership in the PICO User's Group...technicians the world over and the best PICO users on the face of the earth.

In addition to lifetime support, each AutoServiceTech/Autonerdz PICO kit comes with additional accessories and training DVDs, to make sure you get full use out of your new PICO!  AND Free Shipping for orders in the continental United States.

Sorry, we don't ship outside the country.  Canadian customers should check with our two affiliates:  Ron Brownand Todd Huggard.

If  you originally purchased your 3223 or 3423 scope kit from Autonerdz or an Autonerdz affiliate, your PICO Group membership continues as before.  If you are upgrading a scope purchased from somewhere else, contact Tom for information on adding this valuable resource to your upgrade...